Tucker, GA · DeKalb County
Commercial Air Duct Cleaning in Tucker, GA
Commercial Air Care provides commercial air duct cleaning in Tucker, Georgia for industrial parks, warehouses, offices and restaurants near Mountain Industrial Boulevard. Crews clean high trunk lines, unit heaters, returns and coils with HEPA negative air and lift access, then deliver photo-documented system reports.
What does commercial air duct cleaning in Tucker include?
Commercial Air Care cleans every reachable component of the air path in Tucker: supply trunks and branches, return ducts, mixing plenums, evaporator coils, blower wheels, dampers, grilles and ceiling diffusers. Work is performed under HEPA-filtered negative pressure by IICRC-certified technicians and verified with before-and-after photographs of each system.
- Supply trunk and branch duct cleaning
- Return duct and mixing plenum cleaning
- Evaporator coil and blower wheel cleaning
- Diffuser, register and grille cleaning
- Damper and access panel inspection
- Commercial dryer vent and exhaust cleaning
Which buildings does Commercial Air Care service in Tucker?
Commercial Air Care services commercial and institutional buildings in Tucker, DeKalb County — offices, restaurants, medical suites, schools, hotels, retail centers, warehouses and industrial facilities — along I-285, Mountain Industrial Boulevard, Lawrenceville Highway and Hugh Howell Road. Systems from a single rooftop unit to multi-floor central plants are handled by the same certified crews.
- Industrial parks and warehouses
- Manufacturing and assembly space
- Offices and flex suites
- Restaurants and retail
- Churches and schools
- Service and repair facilities
What equipment is used on a Tucker duct cleaning project?
Crews use HEPA-filtered negative air machines rated 99.97% at 0.3 microns, variable-speed rotary brush systems, compressed-air whip tools for flex duct, low-pressure coil injection with EPA-registered cleaners, and HEPA contact vacuums. Drying equipment is added when coil or water-related work is part of the Tucker scope.
| Equipment | Class / model | Applied to |
|---|---|---|
| HEPA negative air machine | Phoenix Guardian / OmniAire 2200 class, 99.97% @ 0.3 µm | Source removal under negative pressure |
| Rotary brush system | Variable-speed air-driven brush, nylon and soft-bristle heads | Sheet metal trunks, branches and lined duct |
| Compressed-air whip system | Skipper ball / air-whip rods, 175–200 CFM compressor | Flex duct and long branch runs |
| Coil cleaning system | Low-pressure injection with EPA-registered coil cleaner | Evaporator and condenser coil restoration |
| Contact vacuum | HEPA-filtered commercial extractor | Diffusers, registers, grilles and plenum floors |
| Air movers / dehumidifiers | OmniDry low-profile movers, Phoenix DryMAX | Drying after coil and water-related work |
How does the Tucker service process work, step by step?
Every Tucker project runs through six phases: free on-site inspection, written scope, containment setup, source removal, coil and component cleaning, and documented closeout. Each phase has a defined time window so facility managers know exactly when systems are offline and when the space is usable again.
| Phase | Work performed | Turnaround |
|---|---|---|
| 1. Inspection | Interior duct photography, coil and plenum assessment, vent count, access review | 45–90 minutes |
| 2. Written scope | Fixed price, night-by-night schedule, insurance certificates, access requirements | Within 24 hours |
| 3. Containment | Zone isolation, floor and finish protection, HEPA negative air staged at the air handler | First 60 minutes on site |
| 4. Source removal | Rotary brush and air-whip agitation of trunks, branches, returns and plenums | Bulk of the shift |
| 5. Coil & component | Coil cleaning, blower wheel, dampers, diffusers and register faces | 2–4 hours per air handler |
| 6. Closeout | Reinstallation, wipe-down, after photos, access panel log and written report | Same shift |
Mountain Industrial buildings often mix office HVAC with plant exhaust on the same roof. Crews keep the two scopes separate, clean office systems first under standard containment, then move to plant exhaust and heaters with heavier tooling and separate debris handling.
What are the operational metrics for Tucker projects?
Typical Tucker projects are measured in vents cleaned per crew day, project window per air handler, and building size served. These figures come from Commercial Air Care field records across DeKalb County and are used to build the schedule quoted to each client before work starts.
| Average vents cleaned per crew day | 60–100 vents |
|---|---|
| Typical project window | 1–3 days per building |
| Common building size serviced | 8,000–140,000 sq ft |
| Photo documentation per system | Before/after on every trunk, coil and diffuser |
What determines the cost of duct cleaning in Tucker?
Cost in Tucker is driven by measurable factors, not square footage alone. Commercial Air Care inspects the building at no charge, counts systems and vents, photographs the interior condition, and issues one fixed written price before scheduling. No pricing is quoted over the phone without an inspection.
- Number of air handlers, rooftop units or unit ventilators
- Total count of supply diffusers, return grilles and branch runs
- Duct material — sheet metal, duct board or internally lined
- Access height and whether lift or scaffold equipment is required
- Contamination level: ordinary dust, construction debris, grease or biological growth
- Coil condition and whether blower wheel cleaning is included
- Scheduling window — business hours, overnight, weekend or shutdown
Who performs the work in Tucker?
Gabriel M., Field Operations Manager at Commercial Air Care, oversees every Tucker crew. With 23 years in commercial HVAC cleaning, mold remediation and water damage restoration, he sets the on-site standard and reviews each project's photo documentation before it is released to the client.
IICRC certified
Every crew lead on site
Since 2011
Metro Atlanta commercial work
24/7 dispatch
Smoke, water and mold events
What safety and compliance standards apply in Tucker?
Commercial Air Care works to the NADCA ACR source-removal method, NFPA 96 for kitchen exhaust, ASHRAE 62.1 ventilation practice and OSHA site-safety rules on every Tucker project. Crew leads are IICRC certified, insurance certificates are issued before mobilization, and each system is documented with dated before-and-after photographs.
| Standard | Applies to | What it means on site |
|---|---|---|
| IICRC certification | Every crew lead on site | Air duct, mold remediation and water damage restoration certifications held by the supervising technician. |
| NADCA ACR source-removal method | All duct and plenum work | Continuous negative pressure, mechanical agitation and HEPA containment before any system is restarted. |
| NFPA 96 | Kitchen exhaust and hood systems | Bare-metal cleaning of hoods, risers and fans, with service stickers and a dated report left on site. |
| ASHRAE 62.1 ventilation practice | Occupied office and medical space | Outside-air paths, filter racks and coils checked so airflow returns to design after cleaning. |
| OSHA site safety | Lifts, ladders and confined access | Fall protection, lockout-tagout at the air handler, PPE and marked work zones on every shift. |
| Insurance & documentation | Property and facility managers | General liability and workers' comp certificates issued before mobilization; photo report at closeout. |
Crews carry general liability and workers' compensation coverage, and can be added to your vendor compliance portal before the first Tucker shift.
How fast does a crew reach a Tucker building?
Crews dispatch to Tucker from the Atlanta office on Maple Drive NE. Most Tucker facilities get a free walkthrough within 24–48 hours of the first call, a written scope within another 24 hours, and a scheduled start within about a week. Emergencies are mobilized the same day.
| Phone answered | Business hours, live — 24/7 dispatch line for water, smoke and mold events |
|---|---|
| Quote request reply | Same business day |
| Free on-site walkthrough | Usually within 24–48 hours of your call |
| Written scope after the walkthrough | Within 24 hours |
| Standard project start | Typically 3–7 days after approval, scheduled around your hours |
| Emergency mobilization | Same-day crew dispatch for flooding, smoke or shutdown risk |
Overnight, weekend and holiday windows are standard for occupied Tucker buildings — no charge difference for working outside business hours.
Business districts we cover in Tucker
Tucker is served district by district, because a high-rise floor, a warehouse bay and a restaurant row each need a different access plan and schedule. Open the district page closest to your address for the buildings, corridors and air quality issues we actually find there.
Tucker commercial duct cleaning — frequently asked questions
Do you clean both plant exhaust and office HVAC in Tucker?
Yes, as separate scopes in one mobilization. Office systems are cleaned first under standard containment, then plant exhaust and unit heaters with heavier tooling and separate debris handling and disposal.
Can you work during a scheduled plant shutdown?
Yes. Tucker manufacturers frequently book us into holiday or maintenance shutdowns so all ductwork, heaters and exhaust are completed while production is already down.
How do you access high ductwork?
Scissor lifts or boom lifts, supplied as part of the scope, with rolling scaffold for tight aisles. Lift requirements are itemized in the written quote so there are no surprises.
How often should Tucker industrial ductwork be cleaned?
Annual to biennial for production areas with process dust, three to five years for attached office space, adjusted after we photograph the actual dust load in your system.
Related pages for Tucker facility managers
- Full Tucker service area page — every commercial service we run in Tucker, DeKalb County.
- Commercial HVAC repair, airflow and ductwork services — when cleaning reveals a mechanical or duct-integrity issue.
- Atlanta commercial air quality guides — cleaning intervals, ASHRAE and NFPA 96 basics, and documentation standards.
Request a free Tucker inspection
Commercial Air Care
3133 Maple Dr #160
Atlanta, GA 30305
Book a Tucker walkthrough