Kennesaw, GA · Cobb County
Commercial Air Duct Cleaning in Kennesaw, GA
Commercial Air Care provides commercial air duct cleaning in Kennesaw, Georgia for offices, retail centers, restaurants and light industrial buildings near Barrett Parkway. Crews clean trunks, returns, coils and exhaust with HEPA negative air machines and rotary brushes, and document each air handler with photos.
What does commercial air duct cleaning in Kennesaw include?
Commercial Air Care cleans every reachable component of the air path in Kennesaw: supply trunks and branches, return ducts, mixing plenums, evaporator coils, blower wheels, dampers, grilles and ceiling diffusers. Work is performed under HEPA-filtered negative pressure by IICRC-certified technicians and verified with before-and-after photographs of each system.
- Supply trunk and branch duct cleaning
- Return duct and mixing plenum cleaning
- Evaporator coil and blower wheel cleaning
- Diffuser, register and grille cleaning
- Damper and access panel inspection
- Commercial dryer vent and exhaust cleaning
Which buildings does Commercial Air Care service in Kennesaw?
Commercial Air Care services commercial and institutional buildings in Kennesaw, Cobb County — offices, restaurants, medical suites, schools, hotels, retail centers, warehouses and industrial facilities — along I-75, Barrett Parkway, Cobb Parkway (US-41) and Chastain Road. Systems from a single rooftop unit to multi-floor central plants are handled by the same certified crews.
- Office and flex buildings
- Retail centers along Barrett Parkway
- Restaurants and franchise kitchens
- Light industrial and storage facilities
- University-adjacent commercial space
- Medical practices and clinics
What equipment is used on a Kennesaw duct cleaning project?
Crews use HEPA-filtered negative air machines rated 99.97% at 0.3 microns, variable-speed rotary brush systems, compressed-air whip tools for flex duct, low-pressure coil injection with EPA-registered cleaners, and HEPA contact vacuums. Drying equipment is added when coil or water-related work is part of the Kennesaw scope.
| Equipment | Class / model | Applied to |
|---|---|---|
| HEPA negative air machine | Phoenix Guardian / OmniAire 2200 class, 99.97% @ 0.3 µm | Source removal under negative pressure |
| Rotary brush system | Variable-speed air-driven brush, nylon and soft-bristle heads | Sheet metal trunks, branches and lined duct |
| Compressed-air whip system | Skipper ball / air-whip rods, 175–200 CFM compressor | Flex duct and long branch runs |
| Coil cleaning system | Low-pressure injection with EPA-registered coil cleaner | Evaporator and condenser coil restoration |
| Contact vacuum | HEPA-filtered commercial extractor | Diffusers, registers, grilles and plenum floors |
| Air movers / dehumidifiers | OmniDry low-profile movers, Phoenix DryMAX | Drying after coil and water-related work |
How does the Kennesaw service process work, step by step?
Every Kennesaw project runs through six phases: free on-site inspection, written scope, containment setup, source removal, coil and component cleaning, and documented closeout. Each phase has a defined time window so facility managers know exactly when systems are offline and when the space is usable again.
| Phase | Work performed | Turnaround |
|---|---|---|
| 1. Inspection | Interior duct photography, coil and plenum assessment, vent count, access review | 45–90 minutes |
| 2. Written scope | Fixed price, night-by-night schedule, insurance certificates, access requirements | Within 24 hours |
| 3. Containment | Zone isolation, floor and finish protection, HEPA negative air staged at the air handler | First 60 minutes on site |
| 4. Source removal | Rotary brush and air-whip agitation of trunks, branches, returns and plenums | Bulk of the shift |
| 5. Coil & component | Coil cleaning, blower wheel, dampers, diffusers and register faces | 2–4 hours per air handler |
| 6. Closeout | Reinstallation, wipe-down, after photos, access panel log and written report | Same shift |
Franchise kitchens in Kennesaw run to a corporate specification, so crews clean to the brand standard and deliver the report in the format the franchisor's compliance portal accepts, including hood, duct and fan photos with the service date stamped.
What are the operational metrics for Kennesaw projects?
Typical Kennesaw projects are measured in vents cleaned per crew day, project window per air handler, and building size served. These figures come from Commercial Air Care field records across Cobb County and are used to build the schedule quoted to each client before work starts.
| Average vents cleaned per crew day | 65–95 vents |
|---|---|
| Typical project window | 1–2 days per building |
| Common building size serviced | 4,000–70,000 sq ft |
| Photo documentation per system | Before/after on every trunk, coil and diffuser |
What determines the cost of duct cleaning in Kennesaw?
Cost in Kennesaw is driven by measurable factors, not square footage alone. Commercial Air Care inspects the building at no charge, counts systems and vents, photographs the interior condition, and issues one fixed written price before scheduling. No pricing is quoted over the phone without an inspection.
- Number of air handlers, rooftop units or unit ventilators
- Total count of supply diffusers, return grilles and branch runs
- Duct material — sheet metal, duct board or internally lined
- Access height and whether lift or scaffold equipment is required
- Contamination level: ordinary dust, construction debris, grease or biological growth
- Coil condition and whether blower wheel cleaning is included
- Scheduling window — business hours, overnight, weekend or shutdown
Who performs the work in Kennesaw?
Gabriel M., Field Operations Manager at Commercial Air Care, oversees every Kennesaw crew. With 23 years in commercial HVAC cleaning, mold remediation and water damage restoration, he sets the on-site standard and reviews each project's photo documentation before it is released to the client.
IICRC certified
Every crew lead on site
Since 2011
Metro Atlanta commercial work
24/7 dispatch
Smoke, water and mold events
What safety and compliance standards apply in Kennesaw?
Commercial Air Care works to the NADCA ACR source-removal method, NFPA 96 for kitchen exhaust, ASHRAE 62.1 ventilation practice and OSHA site-safety rules on every Kennesaw project. Crew leads are IICRC certified, insurance certificates are issued before mobilization, and each system is documented with dated before-and-after photographs.
| Standard | Applies to | What it means on site |
|---|---|---|
| IICRC certification | Every crew lead on site | Air duct, mold remediation and water damage restoration certifications held by the supervising technician. |
| NADCA ACR source-removal method | All duct and plenum work | Continuous negative pressure, mechanical agitation and HEPA containment before any system is restarted. |
| NFPA 96 | Kitchen exhaust and hood systems | Bare-metal cleaning of hoods, risers and fans, with service stickers and a dated report left on site. |
| ASHRAE 62.1 ventilation practice | Occupied office and medical space | Outside-air paths, filter racks and coils checked so airflow returns to design after cleaning. |
| OSHA site safety | Lifts, ladders and confined access | Fall protection, lockout-tagout at the air handler, PPE and marked work zones on every shift. |
| Insurance & documentation | Property and facility managers | General liability and workers' comp certificates issued before mobilization; photo report at closeout. |
Crews carry general liability and workers' compensation coverage, and can be added to your vendor compliance portal before the first Kennesaw shift.
How fast does a crew reach a Kennesaw building?
Crews dispatch to Kennesaw from the Atlanta office on Maple Drive NE. Most Kennesaw facilities get a free walkthrough within 24–48 hours of the first call, a written scope within another 24 hours, and a scheduled start within about a week. Emergencies are mobilized the same day.
| Phone answered | Business hours, live — 24/7 dispatch line for water, smoke and mold events |
|---|---|
| Quote request reply | Same business day |
| Free on-site walkthrough | Usually within 24–48 hours of your call |
| Written scope after the walkthrough | Within 24 hours |
| Standard project start | Typically 3–7 days after approval, scheduled around your hours |
| Emergency mobilization | Same-day crew dispatch for flooding, smoke or shutdown risk |
Overnight, weekend and holiday windows are standard for occupied Kennesaw buildings — no charge difference for working outside business hours.
Business districts we cover in Kennesaw
Kennesaw is served district by district, because a high-rise floor, a warehouse bay and a restaurant row each need a different access plan and schedule. Open the district page closest to your address for the buildings, corridors and air quality issues we actually find there.
Kennesaw commercial duct cleaning — frequently asked questions
Can you meet franchise brand standards in Kennesaw?
Yes. We clean to the franchisor's specification and deliver date-stamped hood, duct and fan photos in the format most corporate compliance portals accept, alongside the NFPA 96 service report.
Do you clean both kitchen exhaust and HVAC in one visit?
Yes. Kennesaw restaurants commonly book both on the same overnight visit so the kitchen only closes once, and both systems are documented separately in the closeout report.
How long is a typical Kennesaw retail project?
A single-tenant retail space with two rooftop units is usually one night. A center with six to ten units runs two to three days, sequenced one unit at a time.
What affects the quoted price?
Air handler count, vent count, duct access height, grease or dust load, coil condition and after-hours scheduling. Each item appears in the written quote after the free walkthrough.
Related pages for Kennesaw facility managers
- Full Kennesaw service area page — every commercial service we run in Kennesaw, Cobb County.
- Commercial HVAC repair, airflow and ductwork services — when cleaning reveals a mechanical or duct-integrity issue.
- Atlanta commercial air quality guides — cleaning intervals, ASHRAE and NFPA 96 basics, and documentation standards.
Request a free Kennesaw inspection
Commercial Air Care
3133 Maple Dr #160
Atlanta, GA 30305
Book a Kennesaw walkthrough